All Stainless Steel Single Left Sink Bench with Pot Undershelf – SSB7-1200L/A
1200 mm wide

SWBD-6-0900 Work bench with 2 Drawers and Undershelf
ALL STAINLESS STEEL
• 600 mm deep × 900 mm high
• 2 x drawers
• Solid undershelf

• Toughened Front & Rear Glass
• Low Energy Use 
• Adjustable Shelves 
• Advertising Lightbox
• Two grid levels
• Glass sliding doors
• Removable integrated humidity basin
• Halogen Down Lights
• Easy To Read & Accurate Temperature Gauge
• Humidity Water Reservoir
• Edge-Protected Glass Doors On Metal Runners 
• Easy-clean Stainless Steel interior
• Rear door opening

All Stainless Steel Right Inlet Single Sink Dishwasher Inlet Bench – SSBD7-1200R/A
1200mm wide
• 700 mm deep × 900 mm high
• Bowl size 450mmW×450D×300H; 90 mm Ø drain hole
• specially designed for quick & simple assembly
• come with instruction manual & tools
• supplied flat-packed for ease of transport
• 4 legs per bench
– 2100 & 2400 mm wide benches have 6 legs
• 1.2 mm S/S
• 15 mm wet edge
• right bowl positioning
• bowls are fully welded, polished inside & out
• 90 mm Ø drain hole
Splashbacks
• Stainless Steel backed • 180 mm high; 40 mm thick
• bevelled • fully enclosed
Legs
• 1.2 mm S/S; 42 mm Ø
• fully adjustable S/S polished disc feet that match the legs perfectly
• castor kits available (lockable)
Benchtops
• 1.2 mm material; SUS304 (18/8)
• lined with XPS board, 15 mm thick & S/S panel
• special S/S ‘U’ channel reinforcements under
– as the bench size increases so does the number of channels

Note
LEFT side sink inlet bench
When facing the bench the dishwasher inlet & sinks are on the left side.
RIGHT side sink inlet bench
When facing the bench the dishwasher inlet & sinks are on the right side.

All Stainless Steel Double Centre Sink Bench with Pot Undershelf – DSB6-1200C/A
1200 mm wide
Free optional leg brace instead of pot shelf, please specify leg brace on order if required
• Bowl size 400mmW×400D×300H; 90 mm Ø drain hole
• 600 mm deep × 900 mm high
• Specially designed for quick & simple assembly
• Comes with instruction manual & tools
• Supplied flat-packed for ease of transport
• 4 legs per bench – 2100 & 2400 mm wide benches have 6 legs
• 1.2 mm S/S
• 15 mm wet edge
• Centre bowl positioning
• Bowls are fully welded, polished inside & out
• 90 mm Ø drain hole

• Cast aluminum plate with Teflon coating
• The inner plate can be changed with a screwdriver
• An output of 20 Belgian waffles in one hour
• Stainless steel structure
• The temperature range: +124 to +230℃
• Time Range: 0 to 99min59sec
• Waffle thickness can be 1 inch
• 18cm diameter plate
• Rotating plate for better batter distribution
• Stainless steel heating element on both sides
• Rock on/off switch with illuminator
• PCB control with precise temperature and time. The buzzer would beep after the time is up
• Anti-slip rubber foot
• Stainless steel crumb collector
• Bakelite handle on both sides, cool to the touch

All Stainless Steel Workbench with Splashback and Solid Undershelf – WBB7-2100/A
2100mm Wide
Free optional leg brace instead of solid shelf; please specify leg brace on purchase order if required
OPTIONAL DRAWERS AVAILABLE; – See Stainless Steel Accessories

• 700 mm deep × 900 mm high
• Specially designed for quick & simple assembly
• Comes with instruction manual & tools
• Supplied flat-packed for ease of transport
• 4 legs per bench – 2100 & 2400 mm wide benches have 6 legs
• Locking drawers available*

• Stainless steel structure with drain tap
• Thermostat range 30 – 190℃
• Hi limit switch ensures ongoing safe operation
• Stainless steel tank 400x400mm
• Comes with 2x Nickel coating wire mesh trays
• Wiring bottom grid to filter food waste and protect heater
• Micro-switch for safety of operators
• Heating element stops automatically once lifted up for safer and easier cleaning
• Stainless steel lid with Bakelite handle
• Two used lid: cover during night, draining tray while frying
• Power and heating light indicators
• Heavy duty anti slippery foot